AOLAN-100A耐高温高性能润滑油
AOLAN-100A High temperature resistant high performance lubricating oil
产品综述
在大扭矩、低转速、高温潮湿的工业环境下为提高链条传动的平稳性、承载能力和使用寿命，通常需要在链条的各铰链部位加入润滑油以保持链节灵活自如、缓和链条冲击、减少摩擦、降低磨损，使链条始终处于良好润滑状态。
在汽车、纺织、建材、塑料等行业中的烘房、烤箱、热炉等设备的链条传送系统中要求润滑油品必须具有高温结焦少、热氧化性能好、高温蒸发损失小、润滑极压性能好、粘附性强、粘度适中、粘度指数高等性能，并能使被润滑设备具有了好的高温抗氧化腐蚀性能。西安傲蓝机电科技有限公司通过对基础油和添加剂的大量细致筛选与复配,开发出的AOLAN-100A耐高温高性能润滑油,其性能可与国外进口优质高温润滑油媲美,可满足用户的使用要求。
Product Overview
In the high-torque, low speed, high temperature and humid industrial environments, to improve the smoothness of the chains transmission, carrying capacity and service life, people usually by adding oil in the hinge parts of the chain to maintain flexible and comfortable, so as to ease the impact of the chains, reduce friction, reduce wear, so the chains are always in good lubricating condition.
In the automotive, textile, building materials, plastics and other industries, the drying room, oven, furnace and other equipment which have the chains of transmission system require lubricating oil products can have high temperature coke less, good thermal oxidation, high temperature evaporation less loss, good extreme pressure lubrication properties, strong adhesion, middle viscosity, viscosity index high and etc，make the lubricated equipments a good high-temperature oxidation corrosion resistant. Xi'An AoLan company through careful screening and a large number of compound of base oil and additives, developed AOLAN-100A high-temperature resistant high-performance lubricants, their properties can be compared with high-quality high-temperature imported lubricants, which can meet the requirements of users.
产品应用
AOLAN-100A耐高温高性能润滑油可广泛应用于汽车行业的烤漆烘房、喷涂线干燥箱；建材行业的高温烘房；纺织印染行业的国产及进口热定型机、拉伸拉幅机、印花定型机等各种有耐高温润滑系统要求的行业领域及设备。
Product Application
AOLAN-100A High temperature resistant high performance lubricating oil can be widely used in the automotive industry for painting-drying room, painting line oven; high-temperature drying room in building materials industry; for domestic and imported heat-setting machines, tenter stretching machine, forming machine of textile printing and dyeing industry and other industries and equipment which have high requirements of high-temperature lubrication system.
产品特点
AOLAN-100A高性能润滑油是以优质特制的合成油为基础油，并加入抗氧、抗磨、防腐蚀等添加剂精制而成，具有如下特点：
1. 优良的高温化学稳定性，高温蒸发损失小，适用温度范围：-20℃～240℃；
2. 润滑极压性能好、抗磨损性突出，可承受较重负荷；
3. 结焦少，润滑表面可长期保持清洁状态；
4. 黏温性能好，机器低温易启动；
5. 优良的渗透力，极佳的粘附性；
6. 不含硅酮类成分；
7. 挥发少，能有效节约润滑油，不污染环境，改善工作条件。
Product Features
The base oil of AOLAN-100A High temperature resistant high performance lubricating oil is a special high-quality synthetic oil, and added with antioxidant, anti-wear, anti-corrosion additives, refined, with the following characteristics:
1. Excellent high-temperature chemical stability, high temperature evaporation less loss, temperature range: -20 ℃ ~ 240 ℃;
2. Good Lubrication extreme pressure performance, outstanding abrasion resistance, can withstand heavy loads;
3. Less coking, lubricating surface can maintain long-term clean state;
4. Good Viscosity-temperature performance, easy start in low-temperature;
5. Good penetration, excellent adhesion;
6. It does not contain silicone components;
7. Less volatile, can effectively save oil, do not pollute the environment and improve working conditions.
典型数据
外观：浅黄色透明液体
运动粘度：40℃ 102.8mm2/s
100℃ 12.65mm2/s
粘度指数：137
开口闪点：267℃
倾点：-40℃
Typical data
Appearance: light yellow transparent liquid
Kinematic viscosity: 40℃ 102.8mm2/s
100℃ 12.65mm2/s
Viscosity index: 137
Flash point-open cup: 267 ℃
Pour point: -40 ℃
注意事项
1. 不同润滑油之间可能会发生物理或化学反应从而导致使用性能降低甚至不能使用，所以不得与其他型号和品种的润滑油品混合使用。
2. 当需更换不同润滑油品时，必须等到现用润滑油品使用完后，方可加入新的润滑油品。
3. 未用完润滑油品应及时封盖，以避免水分、灰尘等杂质的混入造成污染。
4. 若润滑油品使用在与橡胶、塑料、油漆等非金属材料接触的润滑部位时，事先应进行材料相容性试验。
5. 润滑油品应贮存在阴凉、通风、避光、远离火源之处。
Note
1. Different lubricants may occur physical or chemical reaction resulting in reduced performance or even not useable, so it can not mix with any other models and variety of oil products.
2. When the need to switch to a different oil product, it must wait until the current use of oil products completely finished, then adding new oil products.
3. Unused lubricating oil should be promptly sealed to prevent moisture, dust and other impurities mixed.
4. If the lubricant used with the rubber, plastics, paints and other non-metallic materials on lubrication contact parts, prior compatibility test should be carried out.
5. Lubricant should be stored in a cool, ventilated, dark, away from the fire place.
产品包装
5升、10升、25升塑料桶或根据客户需求进行包装。
Product packaging
5 liters, 10 liters, 25 liters plastic drum or according to your demand
客服1